Pallmann Pall-X Power is a 1-component clear waterborne hardwood floor finish for commercial or residential use. No hardener is needed. Pallmann Pall-X Power is compatible with all Pallmann sealers and finishes. Coverage and Sheens Coverage is approximately 450-500 square feet per gallon. Available gloss/sheen levels: Ultra Matte, Satin, Semi-Gloss, and Gloss. Will not amber over time. Odor and Stability Very slight non-offensive odor. Non-flammable: Pall-X Power should be stored in a climate controlled environment. Pall-X Power can be used hours or days after initial opening. Necessary Tools and Materials T-Bar applicator Brush Cut-in pad or waterborne roller Drying Process Full cure (meaning scuff, scratch and chemical resistant) in 5 days. After 24 hours, the floor may be walked on, but it remains susceptible to scuffing or marring until completely cured. Do not replace area rugs until the floor has fully cured. Do not allow foot traffic until the floor is sufficiently dried and cured. Cleanup Application tools should be thoroughly cleaned with water and stored in an airtight container. Dispose of any remaining product in accordance with local, state and federal regulations.
